Description
Switch between the engraver and your rotary device without plugging and unplugging cables – when the engraver is powered off 😉
Should also work on the Neje 2 Max – you will have to disconnect the 2nd ‘Y’ stepper motor however. Mod for this coming soon.
Currently made to order – if you would like different cable lengths please let me know when ordering (email to: james@jafweb.co.uk). Unless you let me know rotary cable length will be 1.5m.
Sorry – had to bump the price a little uses 5 x times the cable length of the LM1 switches!
Â
Cable for the rotary is 1.5m long so is plenty long enough to be installed through a drag chain if you have one.
The cable can be supplied with the plug attached or not. It is easier to install in the drag chain without the plug attached. Instructions will be provided for attaching the plug.
Instructions are here: Ortur LM 2 – 2 Pro Switch V1.1
Chris (verified owner) –
If you are using a rotary with your laser then this is a must have accessory.
My rotary is now permanently attached to the laser so with a flick the switch and it’s ready to go, also I don’t have to worry about damaging or wearing out the connections.
Super easy to fit, took maybe 10 mins and most of that time was feeding the wire through the drag train.
The quality of the switch is excellent and delivery was super fast. I really can’t rate this product enough.
Damian Burrin (verified owner) –
Very well made. Fits the S2 version of the OLM2 perfectly.
Thank you – this saves me swapping cables between jobs
James –
Good to hear. Thank you.